MVM
PX 1000
PX 1000 Knife Sharpening Machine

2

a) Manual -automatic downfeed unit with adjustable feed increasing from 0,001 to 0,04 mm. and automatic stop at stated value.

b) Grinding motor 2,2 Kw - 2800 RPM (optional 3,7 Kw)

c) Carriage speed for a fixed speed of 13 m/min. (531.5 IPM)

d) Sliding guides covered with hardened and ground replacable strips.

e) Stopped knives-holders for grinding at once 4 overlapped blades with locking clamps.

f) Tiltable chuck through 100° : the degrees can be read on a steel-ruler having 2 stops at 0° and 90°.
a
b

 

c

a) The electric pump feeds the coolant diffusers.

b) The tank collects the coolant and permits decantation.

c) The magnetic chuck (optional) is ideal to hold single blades and is also designed to allow the mechanical clamping of overlapped blades. Chuck mm. 1000 x 117

d) Adjustable carriage run from 50 to 1000mm

e)Adjustable coolant diffusers.

f)Cup grinding wheel diameter 150 x 60 x 20 mm. (5.9 x 2.4 x 0.8 in.)


Technical Features:
Grinding Capacity

50-1000 mm

Knives holding chuck made of cast iron with mechanical clamping 117 mm (4.6 in)
Power of the wheel motor 2,2 kW
Revs. of the wheel motor 2800 RPM
Clearances between chuck and wheel 70 mm
Cup wheel diameter 50 mm
Carriage speed 13 m/min
Variable carriage speed (optional) 2/18 m/min
Overall Dimensions 2480x790x1530mm
Net weight 580 Kg



Fig. 1

Chuck for holding HM knives 		Fig. 2

Push-button panel 		Fig. 3

Diamond wheel
4
Copyright ©2006 Cut Technologies Inc. All Rights Reserved