K 250 Knife Sharpening Machine
Features of the K 250:
- Carriage glide runners
- Head free from any vibration and noise
- Carriage drive by means of a toothed belt that grants a smooth glide
- High rate of coolant on the piece to be worked by means of 3 nozzles, one of which at the center of the grinding wheel
- Possibility to design and supply tools for clamping special blades
|
|
Push button panel |
Angular divisor ± 90° |
|
|
Magnetic water cleaner |
Wheel wear compensation |
Rear View of the K 250
Technical Information
Grinding Wheel Motor Power |
Grinding Wheel Diameter |
Carriage Speed |
Max Clearance between chuck and grinding wheel |
Rotating Magnetic Chuck Width |
Magnetic Chuck Width |
|
|
2÷30 m/min
(7
÷98 FT/min )
|
|
150 mm
(5,9 in)
|
150mm
(5,9in) |
|
Overall Sizes: Length x Width x Height mm
|
|
1500
|
3600x1300x1700 |
|
2100 |
4200x1300x1700 |
2500 Kg - (5520 lbs) |
2500 |
4650x1300x1700 |
3000 Kg - (6620 lbs) |
3100 |
5250x1300x1700 |
3300 Kg - (7280 lbs) |
3600 |
5700x1300x1700 |
3600 Kg - (7950 lbs) |
4100 |
6150x1300x1700 |
3900 Kg - (8600 lbs) |
5100 |
7250x1300x1700 |
4600 Kg - (10150 lbs) |
Upon Request
| Grinding Head Motor 7,5 Kw ( 10HP) |
| Transversal Feed of the Grinding Chuck |
| Quick Attachment of the Grinding Wheel |
| Clamping Device for "Doctor Blades" |
| Carriage speed from 0,3 - 25 m/min (0,7 to 82 ft/min) |
| Device for Rotating the Magnetic Chucks ± 90° |
| Wheel Wear Compensation |
| Intake System |
| Automatic Lubrication |
| Water Cleaner with Magnetic Disks |
| Water Cleaner with Paper Filter |
| Version with PLC |
|
