FX 20/40 Grinder Rectifier
FX 20
FX 20 - FX 40 grinders were developed to satisfy the user's demands for accuracy and rapid execution.
Both versions are supplied with a large number of accessories that make them suitable to every possible need.
The technical solutions adopted on these sharpeners are practically the same as those found on a higher class of machines, that have been produced for years by MVM with proven reliability and accuracy.
|
|
Work table angle setting by gearbox |
Control panel |
|
|
Diamond tipped probe RTS 15 for stock removal control and automatic wheel wear compensation |
Auxilliary grinding head TX 150 5 HP, grinding wheel 150 mm diameter |
The features that distinguish our sharpeners from those of the competition are:
- Carriage travels on turcite slides, not ball bearings
- Grinding head free of vibration & noise
- Carriage driven by toothed belt that ensures smooth movement
- High rate of coolant flow on the part being processed by means of 3 nozzles, one which is central, in axis with the grinding wheel downfeed and automatic spark-out
- Possibility of designing and supplying efficient devices for special applications
FX 40
Technical Information
Machine Type |
Grinding Head Motor Power |
Grinding Wheel Diameter |
Carriage Speed |
Max Clearance between horizontal chuck and grinding wheel |
Rotating Magnetic Chuck Width |
Fixed Magnetic Chuck Width |
|
|
|
|
|
|
150 mm
(5,9 in)
|
- |
155 mm
(6 in)
|
- |
|
15 Kw
(20 HP) |
350mm
(14 in) |
1÷25 m/min
3,5÷82 FT/min |
200 mm
(8 in) |
250 mm
(10 in) |
200 mm
(8 in) |
400 mm
(15,7)
|
Upon Request
Magnetic Chuck Width 200-250-300 (rotating)
Magnetic Chuck Width 250-300350 (rotating)
Magnetic Chuck Width 400 (fixed) |
FX 20
Fx 40
FX 40 |
| Magnetic Chuck with thin polarity, HP and brass |
FX 20 - FX 40 |
| Carriage Speed 0,2 - 25 m/min |
FX 20 - FX 40 |
| Grinding Wheel Dresser |
FX 20 - FX 40 |
| Level Detector |
FX 20 - FX 40 |
| Additional Head |
FX 20 - FX 40 |
| Magnetic Disk Purifier |
FX 20 - FX 40 |
| Purifier with Paper Filter |
FX 20 - FX 40 |
| Version with PLC |
FX 20 |
| Segments Holding Ring ø + 250-300-350 |
FX 20 |
| Segments Holding Ring ø + 400-450 |
FX 40 |
| Automatic Lubrication |
FX 20 |
|
